Steel section factor

Learn how the ratio between steel surface area and thickness determines the correct type and amount of coating to apply.

Steel section factor, otherwise known as Hp/A, is critical to the correct specification of intumescent coatings.

The dry film thickness required for a particular fire resistance time depends upon various factors.

One of those factors is steel section factor and, to ensure the correct intumescent paint coating specification it is important to understand steel section factor and how it is calculated.

Steel section factor, also known as Hp/A or ksm, is the ratio of perimeter to cross sectional area of structural steel members. Different section sizes heat up at different rates - the section factor is determined by dividing a section's perimeter by its cross-sectional area.

Hp/A gives an indication of the heating rate and dictates selection of the steel sections that can achieve the required FRL.

Generally, a larger, thicker steel member will have a lower Hp/A and lower heating rate than a smaller, thinner steel member.

This is important to consider because structural steel members with high Hp/A will require more passive fire protection than those with low a Hp/A. We need to apply thicker coatings (i.e. more insulation) to thinner sections than we do to thicker sections to achieve the same level of protection.

In a nutshell:

  • Hp/A, A/V and Ksm are all measurements of the heating rate of a structural steel section in a fire. They are all different terms describing essentially the same thing - steel section factor
  • Hp/A depends on two factors:
  • ~Hp - The heated perimeter of the steel that is exposed to the flames
  • ~A - the cross sectional area of the structural section
  • Ksm depends on one factor:
  • ~The ratio of the exposed surface area to the mass of the section in square metres per tonne
  • Whichever terminology is used, the sectional shape, size and mass of the steel determines the exposed surface area to mass ratio or perimeter to cross sectional surface area

The bottom line of all this is that section size information is critical to ensure adequate protection and accurate budgeting.

Download the PDF

click here
Intumescent coatings
Passive fire protection
Intumescent coating types

There are a variety of intumescent coating types with different properties and application methods. Which type is the best for your situation?

Intumescent coatings
Passive fire protection
learn more
Passive fire protection methods

There are several ways to protect building structural work. Whilst some methods may be more prevalent, there is no one "best way" to protect a building's structure. The best method will most likely be determined by a number of factors, but here are your options.

Intumescent coatings
Passive fire protection
Fire-rated boards
Vermiculite
learn more
Off-site versus on-site application

Nullifire SC902 ‘hybrid’ intumescent coating system - one of our preferred ‘hybrid’ intumescent coating systems - is based on patented technology that delivers exceptional productivity gains for both on-site and off-site applications, in comparison with conventional intumescent coatings used for structural steel fire protection.

Intumescent coatings
Passive fire protection
learn more
Intumescent paint coating specification templates

Access a range of templates supplied by manufacturers for the purposes of specifying their intumescent paint coating products for various FRLs and corrosivity ratings.

Intumescent coatings
Passive fire protection
learn more
Intumescent paint coating corrosivity ratings in the Australian atmosphere

It's common knowledge that corrosion rates are affected by environmental factors, but do you know the various corrosivity ratings and their definitions?

Intumescent coatings
Passive fire protection
learn more
Limiting steel temperatures to maintain structural integrity

Maintaining structural adequacy on load-bearing steel is critical to the fire safety of building occupants, fire fighters and the surrounding built environment. Here's how limiting steel temperatures to maintain structural integrity relates to intumescent paint coatings.

Intumescent coatings
Passive fire protection
learn more
Getting help with intumescent paint coatings

The specifying and application of an intumescent coating system is a highly specialised task that requires considerable training and experience to accomplish correctly.

Intumescent coatings
Passive fire protection
learn more
Fire types and severity

Different combustible materials burn at different temperatures which will have a bearing on the FRL of a given intumescent paint coating. This needs to be taken into account when specifying intumescent products so that the required FRL is ensured for the combustible materials that are likely to be encountered in a particular situation.

Intumescent coatings
Passive fire protection
learn more
Quality assurance for intumescent paint coatings

We believe Painting Contractor Certification Program (PCCP) accreditation is paramount for passive fire protection contractors engaged in applying intumescent paint coating systems.

Intumescent coatings
Passive fire protection
learn more
Specifying intumescent paint coatings

Whilst intumescent coating products may look just like paint, they have an important function (i.e. passive fire protection) that makes their specification a much more involved process.

Intumescent coatings
Passive fire protection
learn more