Products by product range

Here's a guide to products used by Swart & Sons sorted by manufacturer ranges.

Cafco

manufactured by
Promat
Cafco spray coatings are a mixture of vermiculite and Portland cement or gypsum and provide fire protection of the steel and concrete structures they are applied to.

Chartek

manufactured by
International
Chartek Bolt Caps provide an easy-specified solution to critical areas of a facility while incorporating a cost-effective means of inspection.

Durasteel

manufactured by
Promat
Durasteel systems combine lightness, strength, impact resistance and durability with exceptional fire resistance. They have been used successfully for many years, including rail and metro projects, military facilities and in commercial, pharmaceutical and petrochemical plants.

Firetex

manufactured by
Sherwin-Williams
The Firetex range of intumescent passive fire protection coatings provides a visually pleasing finish that allows for a creative usage of structural steel surfaces in building design, whilst offering protection of steelwork from 15 to 120 minutes.

Glasroc

manufactured by
Gyprock
Gyprock Glasroc F is a 30mm thick, high density, square edged gypsum board, recommended for multi-residential and commercial construction projects where a fire-rated encasement is required for structural steel beams and columns to provide up to two hours of fire protection.

Interchar

manufactured by
International
The Interchar range from International offers a range of intumescent coatings; water or solvent-borne, single or multiple component, with a range of fire ratings up to 120 minutes.

Isolatek high density SFRM

manufactured by
Isolatek
Isolatek International’s high density SFRMs are the most rigorously tested products in the industry, designed to cover a range of applications requiring superior thermal performance and exceptional durability.

Isolatek low density SFRM

manufactured by
Isolatek
Isolatek's family of Commercial Density SFRMs covers a range of concealed fireproofing environments. Sometimes referred to as Low Density SFRM, this comprehensive product line includes both dry and wet spray products, each with distinct uses and advantages.

Isolatek medium density SFRM

manufactured by
Isolatek
Isolatek International’s family of medium density SFRMs is designed to cover a full range of exposed, high traffic applications.

Nullifire

manufactured by
Permax
Nullifire offers patented hybrid technology systems, water-based and solvent-based systems that are suitable for different environments and applications.

Pitt-Char

manufactured by
PPG
PPG Pitt-Char NX is a next-generation, flexible epoxy, intumescent coating system designed to resist the most severe hydrocarbon hazards.

Polibrid

manufactured by
International
Combining outstanding impact and abrasion resistance with the ability to withstand a broad range of chemicals, Polibrid 705E is the ideal engineering solution for challenging environments where conventional coatings fail.

Primers

manufactured by
MCU Coatings

Steelmaster

manufactured by
Jotun
SteelMaster 1200WF is the most efficient thin film waterborne intumescent coating for 120 minutes fire protection available anywhere in the world.

Trafalgar Fyre Stop systems

manufactured by
Trafalgar
Trafalgar Fire supplies a comprehensive range of passive fire products and systems, including fire-rated sealants and mastics, fire rated mortar, fire collars, fire pillows, fire rated boards.

Trafalgar FyreBOX

manufactured by
Trafalgar
Trafalgar Fire's FireBOX system allows for multiple and mixed services to pass through it, in close vicinity to each other, with proven fire testing, eliminating the need for separation between adjacent services.

Trafalgar FyreCOLLAR

manufactured by
Trafalgar
Trafalgar FyreCOLLAR fire collars are designed to provide maximum protection against the spread of fire through walls and floors that are penetrated by plastic conduits and plastic pipes.

Typhoon

manufactured by
Permax
Comprising polymeric resin which incorporates fire resistant pigmentation, Typhoon bolt caps are designed to provide protection to bolted connections in structural steel frames in the event of fire and have been tested up to three hours fire protection.

Zinga

manufactured by
Zinga
Zinga is a one-component, film galvanising system containing 96% zinc dust in its dry film. It is a metallic coating - not a paint.
call us today on 08 8262 6226 for expert, reliable advice