MCU-Aluprime-NS

MCU-Aluprime NS is a single component moisture cure polyurea coating, based on aluminium pigments.

It is a penetrating sealer and primer for ferrous and non-ferrous metal substrates that has excellent barrier protection against corrosive elements. MCU-Aluprime NS can be used as a surface tolerant primer, crevice sealer, intermediate or finish coat in atmospheric and splash zone areas. 

MCU-Aluprime NS has unmatched adhesion and wetting characteristics, even on marginally prepared surfaces. It is also ideal for use as a penetrating sealer for crevices, and as a tie coat over most existing coatings and can also be used in lead encapsulation systems. 

• High solids single component based on aluminium pigments primer for ferrous and non-ferrous substrates
• Most surface tolerance primer
• Low viscosity, penetrating sealer to replace penetrating epoxy sealers
• Has unmatched adhesion and good wetting characteristics
• Apply on hand and power tool cleaned, (wet/dry) abrasive blasted or UHP cleaned surfaces
• Works well in splash zones or areas with permanent condensation
• Outstanding abrasion and impact resistance
• Intermediate/Topcoat in highly abrasive environments
• Also used as an intermediate tie coat over most existing coatings and even as a finish coat