MCU-Quickcure
![](https://cdn.prod.website-files.com/5d253c20e31f05f05bdc2a9d/634deda19ea70403c9ed6f66_MCU-Quickcure-product-banner-190613-900px.jpg)
No items found.
A 100% solids proprietary additive designed to accelerate the rate of cure of MCU-Coatings products, except MCU-Coatings’ high heat products and MCU-Insulat 230.
Use when faster cure and overcoat times are required, when relative humidity is lower than 40%, and when applying MCU-Coating’s products in cold climates of 5 ºC or less.
With MCU-Quickcure, recoat times can be reduced down to 30 minutes (see recoat times in the table below) so even a 3-coat system can be applied on the same day.
- Speeds up cure times by as much as 80%
- Cure time reduced 30 min. depending on temperature
- Pot life still one day when spraying
- Increases the DFT tolerance of MCU-Coatings products
- Increases gloss
- Adds performance
- Increases production throughput
Sorry... there are no videos available for this product.
![](https://cdn.prod.website-files.com/5d253c20e31f05f05bdc2a9d/63477dd313b1c6beac26763d_mcu-quickcure%20NZ%20SDS.jpg)
Safety data sheet
MCU-Quickcure safety data sheet - New Zealand
![](https://cdn.prod.website-files.com/5d253c20e31f05f05bdc2a9d/63477d9ac35fb863d34518c7_mcu-quickcure%20AU%20SDS.jpg)
Safety data sheet
MCU-Quickcure safety data sheet - Australia
![](https://cdn.prod.website-files.com/5d253c20e31f05f05bdc2a9d/63477d5f971226200d9ccfb1_mcu-quickcure%20TDS.jpg)
Technical data sheet
MCU-Quickcure technical data sheet
Visit the
MCU-Quickcure
web page