MCU-Aluprime-RG

No items found.

MCU-Aluprime RG is a single component moisture cure polyurea coating, based on aluminium pigments, with higher volume solids allowing higher film builds for enhanced corrosion protection. It is also a penetrating sealer and primer for ferrous and non-ferrous metal substrates that has outstanding barrier protection against corrosive elements.

MCU-Aluprime RG is a surface tolerant primer, crevice sealer, intermediate or finish coat in atmospheric and splash zone areas. 

MCU-Aluprime RG has unmatched adhesion and wetting characteristics, even on marginally prepared surfaces. It is also ideal for use as a penetrating sealer for crevices, and as a tie coat over most existing coatings and can also be used in lead encapsulation systems. 

  • High solids single component based on aluminium pigments primer for ferrous and non-ferrous substrates
  • Most surface tolerance primer
  • Low viscosity, penetrating sealer to replace penetrating epoxy sealers
  • Has unmatched adhesion and good wetting characteristics
  • Apply on hand and power tool cleaned, (wet/dry) abrasive blasted or UHP cleaned surfaces
  • Works well in splash zones or areas with permanent condensation
  • Outstanding abrasion and impact resistance
  • Intermediate/Topcoat in highly abrasive environments
  • Also used as an intermediate tie coat over most existing coatings and even as a finish coat
Sorry... there are no videos available for this product.
Sorry... there are no downloads available for this product.
call us today on 08 8262 6226 for expert, reliable advice