Passive fire protection

products

Typhoon intumescent bolt caps

Comprising polymeric resin incorporating fire resistant pigmentation, bolt caps provide fire protection to bolted connections in structural steel frames for up to three hours.

Cafco Fendolite MII

Cafco Fendolite MII is a spray applied, single package factory controlled premix, based on vermiculite and Portland cement. It may be floated or roller finished.

Cafco 300 vermiculite gypsum-based wet mix spray

Cafco 300 is an Australian made product for internal use and may be applied with a trowel or spray application.

International Interchar 1260

A single component, borate, chlorine and APEO free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire.

International Interchar 1120

A single component, borate and chlorine free, water-borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire.

International Interchar 3120

Thin and thick film, easy to apply, durable epoxy intumescent coating that provides cellulosic passive fire protection for off site applied structural steel. It increases production efficiency, reduces site work and coating schedules.

International Interchar 2060

A single component, borate free, high solids, low VOC intumescent coating designed to to provide fire protection to structural steelwork.

Trafalgar FyreWrap

The leading passive fire protection solution for commercial ductwork, the lightweight Insulfrax core ensures high temperature insulation and performance.

Nullifire SC902

SC902 is a low VOC, one coat, high build system, based on patented technology. It provides a fast cure, effective, structural fire performance, for steelwork, up to a 120 minute fire rating.

Nullifire SC803

Nullifire SC803 Waterborne Intumescent Basecoat is a water based, white, thin film coating that can be used on internal structural steel to C1 and C2 environments.

PPG Pitt-Char NX

PITT-CHAR NX is PPG's next-generation, flexible epoxy intumescent coating system designed to resist the most severe hydrocarbon hazards - pool fires, jet fires and explosions.

Gyprock Glasroc F

Delivered in partnership with worldwide plasterboard specialist Saint-Gobain and forming part of Gyprock’s International Alliance program, Glasroc F meets the needs of the Australian building industry.

Promat Durasteel

A composite board with a fibre reinforced cement core and outer facings of 0.5mm perforated, galvanised steel, mechanically bonded to each surface of the core. Other steel finishes such as stainless steel are also available.

Trafalgar FyreWrap Access Panels

FyreWrap Access Panels are a patented system designed for use on ducts protected by Trafalgar's innovative FyreWrap system.

Trafalgar FyreSHIELD PLUS for ceilings

An Australian-made access panel system designed to be built into plasterboard ceilings. Improved fire and acoustic performance and maintaining the signature Trafalgar Fire quality.

Trafalgar FyreSHIELD for walls and shafts

FyreSHIELD is a proudly Australian made access panel system which has been designed and tested to be built into partition walls and riser shafts.

Trafalgar FyreFLEX Sealant

A water-based, low VOC, environmentally-friendly fire-resistant acrylic sealant perfect for fire-stopping cable and metal pipe penetrations through fire-rated barriers.

Trafalgar FyrePEX Sealant

A graphite water-based intumescent mastic sealant for fire-stopping service penetrations through fire-rated walls and floors, preventing the spread of fire for up to two hours.

Trafalgar FyreSET Mortar

An Australian-made cement-based mixture, formulated specifically for fire-rating applications in openings in fire barriers that include complicated or mixed service penetration types.

Trafalgar FyrePLUG Pillows

Trafalgar FyrePLUG pillows are a tried and tested passive fire penetration system that has been used across the industry for over forty years and are proudly made in Australia.

Trafalgar FyreBATT

A coated mineral fibre product, for use as a fire seal for service penetrations. A high-density fibrous lamella core, sealed on both sides with a flexible fire rated ablative coating, offering high fire protection along with an effective smoke and acoustic seal.

Trafalgar FyreSHEATH

FyreSHEATH is a system designed to simplify the use of FyrePEX High-Performance Sealant, ensuring a compliant amount of sealant every time to achieve the FRL required, up to a -/120/120.

Trafalgar FyreCOLLAR Premium Hinged Retrofit

A range of fire collars designed to provide maximum protection against the spread of fire through walls and floors that are penetrated by plastic conduits, plastic pipes or air-conditioning service bundles.

Trafalgar FyreCOLLAR Mixed Services

Treat multiple sets of pair coil plus their cables, insulated pipes and drain lines all through one penetration, making HVAC&R penetrations fast, clean and easy.

Trafalgar FyreCOLLAR Floor Waste

Cast-In fire collars provide a full range of cast-in fire stopping solutions for floor waste applications across a huge range of common pipe types and sizes, with approvals up to four hours.

Trafalgar FyreCOLLAR Conduit

Trafalgar's FyreCOLLAR Conduit is designed to provide maximum protection against the spread of fire through walls and floors that are penetrated by plastic conduits and pipes.

Trafalgar COREX

Trafalgar COREX is a lightweight, high impact resistant, glass-reinforced gypsum fire-resistant board designed a system that allows for steel structures to be clad to achieve the required FRL under the NCC.

Trafalgar FyreBOARD Maxilite

A lightweight, high performance, calcium silicate based fire rated board, bonded together with non-organic binders. Completely free from asbestos, volatile organic compounds and ozone depleting potential.

Trafalgar FyreCOLLAR Cast-in Low Top

A range of fire collars providing a full range of solutions for use in stack pipe and floor waste applications, for up to four hours across a huge range of common pipes types and sizes.

Trafalgar FyreCOLLAR Cast-in High Top

A range of fire collars providing a full range of solutions for use in stack pipe and floor waste applications, for up to four hours across a range of common pipes types and sizes.

Trafalgar FyreBOX Slab-Mount Bambino

Simplifies the installation of individualservices before the wall construction, providing predictable site costs and fire stopping, independent of other contractors.

Trafalgar FyreBOX Slab-Mount

The FyreBOX Slab-Mount is an Australian made passive fire penetration system used for multiple and mixed service penetrations.

Trafalgar FyreBOX Mini

The FyreBOX™ Mini and Maxi are a retro-fit multi-service penetration system designed to prevent the spread of fire through small or large service penetrations, in the smallest footprint possible.

Trafalgar FyreBOX Maxi

The FyreBOX Maxi is a retro-fit multi-service penetration system designed to prevent the spread of fire through small or large service penetrations, in the smallest footprint possible.

Trafalgar FyreBOX Cast-In

A simple, multi-service passive fire penetration system that can be cast directly into floor slabs to prevent the spread of fire through service penetrations, whilst reducing the footprint needed for riser shafts and cupboards.
call us today on 08 8262 6226 for expert, reliable advice